beautypg.com

Foxconn 915P7AD-8EKRS User Manual

Page 73

background image

Chapter 3 BIOS Description

6 6

Load Optimized Defaults

Load Fail-Safe Defaults

Press to select this option. A dialogue box will pop up that allows you to

load the default BIOS settings. Select and then press to load the

defaults. Select and press to exit without loading. The defaults set

by BIOS set the basic system functions in order to ensure system stability. But if

your computer cannot POST properly, you should load the fail-safe defaults to

restore the original settings, then carry out failure testing. If you only want to load

the defaults for a specific option, you can select the desired option and press

the key.

Select this option and press , and a dialogue box will pop up to let you

load the optimized BIOS default settings. Select and then press to

load the optimized defaults. Select and press to exit without loading.

The defaults set by BIOS are the optimized performance parameters for the

system, to improve the performance of your system components. However, if

the optimized performance parameters are not supported by your hardware

devices, it will likely cause system reliability and stability issues. If you only want

to load the optimized default for a specific option, select the desired option and

press the key.

Set Supervisor/User Password

The access rights and permissions associated with the Supervisor password are

higher than those of a regular User password. The Supervisor password can be

used to start the system or modify the CMOS settings. The User password can

also start the system. While the User password can be used to view the current

CMOS settings, these settings cannot be modified using the User password.

When you select the Set Supervisor/User Password option, the following message

will appear in the center of the screen, which will help you to set the password:

Enter Password:

Enter your password, not exceeding 8 characters, then press . The

password you enter will replace any previous password. W hen prompted, key in

the new password and press .

PDF created with pdfFactory Pro trial version

www.pdffactory.com

This manual is related to the following products: