Foxconn 915P7AD-8EKRS User Manual
Page 58
Chapter 3 BIOS Description
5 1
v
Delay Prior to Thermal (Default: 16Min)
This option is used to set the delay time before the CPU enters auto thermal
mode. The setting values are: 4 Min, 8 Min, 16 Min, 32 Min.
v
Thermal Management (Default: Thermal Monitor 1)
This option is used to manage Prescott CPU thermal.
v
TM2 Bus Ratio (Default: depend on CPU) (optional)
Represents the frequency bus ratio of the throttled performance state that will
be initiated when the on-diesensor goes from not hot to hot.
v
TM2 Bus VID (Default: depend on CPU) (optional)
Represents the voltage of the throttled performance state that will be initiated
when the on-diesensor goes from not hot to hot.
v
Limit CPUID MaxVal (Default: Disabled)
The option is used to set limit CPUID MaxVal. The available setting values are:
Disabled and Enabled.
v
NX BIOS Control (Default: depend on CPU)
(optional)
W hen Disabled, forces the NX feature flag to always return 0. The available
setting values are: Disabled and Enabled.
CPU Feature Menu
PDF created with pdfFactory Pro trial version