Chapter 2 installation instructions – Foxconn 915P7AD-8EKRS User Manual
Page 35

Chapter 2 Installation Instructions
2 8
Chassis Intruder Connector: INTR
The connector connects to the chassis security switch on the case. The system
can detect the chassis intrusion through the status of this connector. If the
connector has been closed once, the system will send a message. To utilize
this function, set
“Case Open Warning” to “Enabled” in the “PC Health Status”
section of the CMOS Setup. Save and exit, then boot the operating system once
to make sure this function takes effect.
SPDIF Out Connector: SPDIF_OUT
The SPDIF out connector is capable of providing digital audio to external speak-
ers or compressed AC3 data to an external Dolby digital decoder.
Note:The empty pin of SPDIF cable should be aligned to empty pin of S/PDIF
out connector.
SPDIF_OUT
1
SPDIF_OUT
+5 V
GND
E mpt y
INTR
1
2
I NTRUDE RJ
GND
PDF created with pdfFactory Pro trial version