Foxconn 915P7AD-8EKRS - Manual (Page 20)

Chapter 2 Installation Instructions
1 3
Installation of DDR/DDR2 Memory
1. There is only one gap in the middle of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Warning :
104 Pins 80 Pins
128 Pins 112 Pins
DDR
memory
DDR2
memory
Be sure to unplug the AC power supply before adding or removing
expan sio n c ard s or oth er system perip herals, esp ecially the
memory d evices, otherwise yo ur mo therb oard or th e system
memory might be seriously damaged.
PDF created with pdfFactory Pro trial version www.pdffactory.com