Foxconn 915P7AD-8EKRS - Manual (Page 43)

Chapter 2 Installation Instructions
3 6
Clear CMOS Jumper: CLS_CMOS
This motherboard uses the CMOS RAM to store all the set parameters. The CMOS
can be cleared by removing the CMOS jumper.
How to clear CMOS?
1. Turn off the AC power supply and connect pins 1 and 2 together using the
jumper cap.
2. Return the jumper setting to the default setting (pins 2 and 3 together with the
jumper cap).
3. Turn the AC power supply back on.
Warning:
1. Disconnect the power cable before adjusting the jumper settings.
2. Do not clear the CMOS while the system is turned on.
Normal Status
(Default)
CLS_CMOS
Clear CMOS
1
3
2
1
3
2
PDF created with pdfFactory Pro trial version www.pdffactory.com