Foxconn 915P7AD-8EKRS User Manual
Page 65
Chapter 3 BIOS Description
5 8
v
Power on By Mouse (Default: Disabled)
This option is used to set the power-on method of your PC. The available
setting values are: Disabled, Mouse Move, Mouse Click.
v
Power On By Keyboard (Default: Disabled)
This option is used to set the power-on method of your PC. The available
setting values are: Disabled, Password, Hot KEY, Any Key, Keyboard 98.
v
KB Power On Password (Default: Enter)
W hen the
“Power On By Keyboard” is set as “Password”, use this item to set
the keyboard password that powers on the system.
v
Hot Key Power On (Default: Ctrl - F1)
When the
“Power On By Keyboard” is set as “Hot KEY”, use this item to set the
hot key combination that awakes the system. The available setting values are:
Ctrl+F1-F12.
v
Onboard Serial Port 1/2 (Default: 3F8/IRQ4 / 2F8/IRQ3)
This option is used to assign the I/O address and interrupt request (IRQ) for
the onboard serial port 1/2. The onboard serial port 2 I/O address and IRQ is
for IrDA using.
v
UART Mode Select (Default: Normal)
Use this option to select the UART mode. Setting values include Normal,
IrDA, ASKIR. The setting value is determined by the infrared module installed
on the board.
v
UR2 Duplex Mode (Default:Half)
This option is available when UART 2 mode is set to either ASKIR or IrDA. This
item enables you to determine the infrared function of the onboard infrared chip.
Super IO Device Menu
PDF created with pdfFactory Pro trial version