Foxconn 915P7AD-8EKRS User Manual
Page 69
Chapter 3 BIOS Description
6 2
v
Wake-Up by PCI card (Default: Enabled)
This option is used to set the system to wake up by PCI card. The setting
values are: Disabled and Enabled.
v
Power On by Ring (Default: Enabled)
If this item is enabled, it allows the system to resume from a software
power down or power saving mode whenever there is an incoming call to
an installed fax. This function needs to be supported by the relevant
hardware and software. The setting values are: Disabled and Enabled.
v
Wake Up On LAN (Default: Enabled)
This option is used to set the system to wake up onboard Lan. The setting
values are: Disabled and Enabled.
v
USB KB Wake-Up From S3 (Default: Disabled)
This option is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode. The setting values are: Disabled and Enabled.
v
Resume by Alarm (Default: Disabled)
This option is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be cancelled. Also, the PC power
source must not be turned off. The setting values are: Disabled and Enabled.
v
Date (of Month) Alarm
W hen the Resume by Alarm set as
“Enabled”, this option will be modified. It is
used to set the timing for the start-up date. The setting values contain 0 - 31.
v
Time (hh:mm:ss) Alarm
W hen the Resume by Alarm set as
“Enabled”, this option will be modified. It is
used to set the timing for the start-up time. The setting values contain hh:0
–
23; mm:0
– 59; ss:0 – 59.
v
Primary IDE 0/1, Secondary IDE 0/1 (Default: Disabled)
When these items are enabled, the system will restart the power saving timeout
counters when any activity is detected on any of the drives or devices on the
primary or secondary IDE channels. The setting values are Disabled and Enabled.
v
FDD, COM, LPT Port (Default: Disabled)
W hen this item is enabled, the system will restart the power saving timeout
counters when any activity is detected on the floppy disk drive, serial port, or
the parallel port.
v
PCI PIRQ[A-D]# (Default: Disabled)
W hen this option is disabled, any PCI device set as the Master will not power
on the system.
PDF created with pdfFactory Pro trial version