Foxconn 915P7AD-8EKRS - Manual (Page 23)

Chapter 2 Installation Instructions
1 6
Power Supply
This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
4-pin ATX_12V Power Connector: PWR2
The ATX power supply connects to PW R2 and provides power to the CPU.
24-pin ATX power connector: PWR1
PW R1 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is secure.
24
24-pin ATX power connector
13
+ 3.3V
-12V
RSVD
+ 5 V GND GND GND
PSON
+5V
+ 3.3V GND
+ 12V
GND
+5V_AUX
+ 3 . 3 V
+5V
+ 12V
1
GND +5V
+ 3. 3V
GND GND
+ 5 V
12
PWROK
4-pin ATX_12V power connector
12V
G ND
12V
3
1
4
2
G ND
Note: We strongly recommended you use 24-
pin power supply. If you want to use 20-pin
power supply, you need to align the ATX power
connector according to the right picture.
align the connector
PDF created with pdfFactory Pro trial version www.pdffactory.com