Foxconn Inferno Katana - Manual (Page 44)

3
37
OnBoard Device Configuration
► HDA Controller
This item is used to enable or disable the HD Audio controller.
► VIA 6308S 1394 Device
This item is used to enable or disable the VIA 6308S 1394 device.
► Realtek 8111D LAN Device
This item is used to enable or disable the Realtek 8111D LAN device.
► Realtek 8111D LAN BootROM
This item is used to enable or disable the Realtek 8111D LAN BootROM.
► Marvell 6121 PATA and eSATA
You may set your PATA and e-SATA to [eSATA+IDE] mode or [RAID+IDE] Mode (RAID for e-SATA,
IDE for PATA). We are using Marvell chip to control PATA and e-SATA devices.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
OnBoard Device Configuration
OnBoard Device Configuration Help Item
HDA Controller Enabled
VIA 6308S 1394 Device Enabled
Realtek 8111D LAN Device Enabled Enabled
Realtek 8111D LAN BootROM Disabled Disabled
Marvell 6121 PATA and eSATA eSATA + IDE
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
Enabled
Options