Foxconn Inferno Katana - Manual (Page 40)

3
33
AHCI Configuration
AHCI Settings
► AHCI BIOS Support
The Advanced Host Controller Interface (AHCI) specification describes the register level
interface for a Host Controller for Serial ATA. The specification includes a description of the
hardware/software interface between system software and the host controller hardware. AHCI
provides more advanced features including SATA features, but some SATA drives may not
support AHCI, unless they are labeled with AHCI support in its specification.
This item is used to enable or disable your motherboard to support the AHCI specification.
► AHCI Port0/1/2/3/4/5
These options display the status of IDE devices. BIOS auto detects the presence of IDE
devices while entering setup.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
AHCI Configuration
AHCI Settings Help Item
AHCI BIOS Support Enables for supporting
► AHCI Port0 Not Detected
► AHCI Port1 Not Detected
► AHCI Port2 Not Detected
► AHCI Port3 Not Detected
► AHCI Port4 Not Detected
► AHCI Port5 Not Detected
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
Enabled