Creating raid 1 – Foxconn Inferno Katana User Manual
Page 100
5
93
4. It then goes to “
Disks” item. Press
RAID5 system.
5. From the hard drive list, use Up or Down arrow key to reach the hard disks you want
to combine them as RAID5, then press
will appear to indicate the drive selection. Here, we select 298GB, 139.7GB and
74.5GB hard disks for an example. Press
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
TryRAID5
RAID5(Parity)
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
Port Drive Model
Serial #
Size
Status
0
Maxtor STM332082 6QF4CRAW
298.0GB
Non-RAID Disk
2 WDC WD1500ADFD-0 WD-WMAP42036047 139.7GB Non-RAID Disk
3 WDC WD800AAJS-00 WD-WMAP95242993 74.5GB Non-RAID Disk
4 WDC WD3200AAKS-0 WD-WCARW4154961 298.0GB Non-RAID Disk
Select 3 to 6 disks to use in creating the volume.
[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
[
SELECT DISKS
]
0 Maxtor STM332082 6QF4CRAW 298.0GB Non-RAID Disk
[
CREATE VOLUME MENU
]
Creating RAID 1
Name:
RAID Level:
Volume0
RAID0(Stripe)
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
Port Drive Model
Serial #
Size
Status
►
0 Maxtor STM332082 6QF4CRAW
298.0GB Non-RAID Disk
►
2 WDC WD1500ADFD-0 WD-WMAP42036047 139.7GB Non-RAID Disk
►
3 WDC WD800AAJS-00 WD-WMAP95242993 74.5GB Non-RAID Disk
4
WDC WD3200AAKS-0 WD-WCARW4154961 298.0GB Non-RAID Disk
Select 3 to 6 disks to use in creating the volume.
[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
3 WDC WD800AAJS-00 WD-WMAP95242993 74.5GB Non-RAID Disk
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[
CREATE VOLUME MENU
]
[
SELECT DISKS
]