Foxconn Inferno Katana User Manual
Page 109
5
102
example 2. Reset a RAID5 system
1. A TryRAID5 volume was built with three hard disks, we want to reset one of them.
Select “
3. Reset Disks to Non-RAID” in main menu and press
2. A warning message is displayed.
3. Select "
Port 3 - WDC WD800AAJS-00" hard disk as the one to be reset. Press
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
3. Reset Disks to Non-RAID
2. Delete RAID Volume
4. Recovery Volume Options
5. Exit
RAID Volume :
ID
Name
Level Stripe Size
Status Bootable
0
TryRAID5
RAID5(Parity) 64KB 149.1GB
Normal
Yes
Physical Disks:
Port Drive Model
Serial #
Size
Type/Status(Vol ID)
0
Maxtor STM332082 6QF4CRAW
298.0GB
Member Disk(0)
2
WDC WD1500ADFD-0 WD-WMAP42036047 139.7GB
Member Disk(0)
3
WDC WD800AAJS-00 WD-WMAP95242993 74.5GB
Member Disk(0)
4
WDC WD3200AAKS-0 WD-WCARW4154961 298.0GB
Non-RAID Disk
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[
DISK/VOLUME INFORMATION
]
[
MAIN MENU
]
3. Reset Disks to Non-RAID
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
3. Reset Disks to Non-RAID
3. Delete RAID Volume
4. Exit
RAID Volume :
* = Data is Encrypted
ID
Name
Level Stripe Size
Status Bootable
0
TryRAID0
RAID0(Stripe) 128KB 465.8GB
Normal
Yes
Physical Disks:
Port Drive Model
Serial #
Size
Type/Status(Vol ID)
0
WDC WD2500JS-60N WD-WCANKC865380 232.9GB
Non-RAID Disk
2
Maxtor 6L250S0
L50SKP4G
232.9GB
Non-RAID Disk
3
ST3320620SV
9QF4YJGQ
298.1GB
Non-RAID Disk
4
ST3300831AS
3NF02XH2
279.5GB
Non-RAID Disk
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[
DISK/VOLUME INFORMATION
]
[
MAIN MENU
]
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
( This does not apply to Recovery volumes)
Port Drive Model
Serial #
Size
Status
0 Maxtor STM332082 6QF4CRAW
298.0GB
Member Disk
2 WDC WD1500ADFD-0 WD-WMAP42036047 139.7GB
Member Disk
►
3 WDC WD800AAJS-00 WD-WMAP95242993 74.5GB
Member Disk
Select the disks that should be reset
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
[
RESET RAID DATA
]