Foxconn Inferno Katana - Manual (Page 122)

Appendix
115
NVIDIA ® SlI
TM
Technology
1. Introduction
NVIDIA ® SLI TM (Scalable Link Interface) technology takes advantage of the increased bandwidth
of the PCI Express TM bus architecture, and features intelligent hardware and software solutions to
deliver earth-shattering PC performance in a multi NVIDIA ® GPU solution.
2. Graphics card configuration
2-1 Installing dual SLI-ready graphics cards
1. Install one graphics card into the PCI-E1_16X slot, the other into the PCI-E2_16X slot.
2. Align and firmly insert the 2-way SLI bridge onto the edge connector of each graphics
card. Make sure that the bridge is firmly in place.
■ In 2-way SLI mode, it needs two identical SLI-ready graphics cards.
■ Make sure that all the graphics cards are certified by NVIDIA, different type of
graphics cards will not work together properly.
■ Make sure that your power supply unit can provide at least the minimum power
required by your system.
■ For the detailed Graphics Card support list on this motherboard, please visit the
website: http://www.foxconnchannel.com
CA
UT
IO
N
!