Foxconn Destroyer - Manual (Page 79)

72
5
1. Find a PC, put a diskette into its floppy
drive A:, put the driver CD into DVD-ROM
drive. Suggest you format the diskette first.
Right click Floppy (A:) to select Format.
2. Click on "OK" to go through this warning
message.
3. C
lick on "OK" to finish the format.
4. Depending on which platform your XP
system is, normally, it is a 32-bit system.
In Windows, browse CD content, and go
to
CD:\Driver\Chipset\xp\IDE\WinXP\
sataraid\Floppy\Disk1, copy all the
content to the first diskette.
5. Check if the first diskette contains the
driver files.
5-1 Create RAID Driver Diskette
If you want to install a brand new Windows XP on a RAID system, you need to create two
RAID driver floppy diskettes which will be used during Windows XP installation later.