Foxconn Destroyer User Manual

Page 100

9. Use [↓] key to select "NVIDIA nForce Storage Controller (required)", then press

[Enter]. Still, The RAID floppy diskette 1 is inside the floppy drive.

10. Two drivers are displayed. Press [Enter] to continue.

Windows Setup

Setup will load support for the following mass storage device(s):

NVIDIA RAID Driver (required)
NVIDIA nForce Storage Controller (required)

* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.

* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.

S=Specify Additional Device ENTER=Continue F3=Exit

Windows Setup

You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.

ENTER=Select F3=Exit

NVIDIA nForce Storage Controller (required)

NVIDIA RAID Driver (required)

NVIDIA nForce Storage Controller (required)