Foxconn Destroyer User Manual

Page 105

Text mode
Original mode

2. Select a RAID array for use (also can refer to section 5-3)

After rebooting your computer, you will see the RAID software prompting you to

press [F10].
Press [F10] to enter the NVIDIA MediaShield BIOS setup and configure the mirrored
RAID array as described in the 5-3 section. Finally, you can reach this step as
depicted.

3. Press [Ctrl]+[X] keys to exit and go to Windows.
4. In Windows, click "Cancel" to skip any "Found New Hardware Wizard".

Use driver CD and click on "Chipset Driver" to install the NVIDIA RAID driver. The

RAID driver can be installed only when you select and enable "RAID" in BIOS "SATA

Operation Mode" setting. If you do not select RAID, then RAID driver can not be

installed.

MediaShield BIOS Mar 31 2008

- Array List -

[Ctrl-X] Exit [↑↓] Select [B] Set Bootable [N] New Array [ENTER] Detail

Boot Status Vendor Array Size

Healthy NVIDIA MIRROR 232.88G