Foxconn Destroyer - Manual (Page 33)

26
3
► SATA Channel 1/2/3/4 Master / ESATA channel 1/2 Master
When SATA Operation Mode is set to [IDE], These items will appear. The relationships
between SATA channels and SATA ports on the motherboard are :
SATA Channel 1 Master is the lower SATA port of SATA_1 on the motherboard.
SATA Channel 2 Master is the lower SATA port of SATA_2 on the motherboard.
SATA Channel 3 Master is the upper SATA port of SATA_1 on the motherboard.
SATA Channel 4 Master is the upper SATA port of SATA_2 on the motherboard.
ESATA Channel 1 Master is the upper ESATA port of the rear panel.
ESATA Channel 2 Master is the lower ESATA port of the rear panel.
► Drive A
This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [None], [360KB, 5.25 in], [1.2MB, 5.25 in], [720KB, 3.5 in], [1.44MB, 3.5 in] and
[2.88 MB, 3.5in].
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
► Model Name
This item shows the model name.
► BIOS Version
This item shows the BIOS version.
► Memory
These are Display-Only information of the system memory, determined by POST(Power On
Self Test) of the BIOS.
► BCM5788 / BCM5786 MAC Address
This item shows the onboard LAN MAC address.
► CPU Name
This item shows the CPU name installed in your system.
All Errors Whenever the BIOS detects a nonfatal error, the system will stop
and you will be prompted.
No Errors The system boot will not stop for any errors that may be
detected.
All, But Keyboard The system boot will not stop for a keyboard error; but it will stop
for all other errors.
All, But Diskette The system boot will not stop for a diskette error; but it will stop
for all other errors.
All, But Disk/Key The system boot will not stop for a keyboard or disk error, but it
will stop for all other errors.
SATA_3 ports on the motherboard are working under RAID mode, AHCI mode or Linux
AHCI mode. In IDE mode, these two SATA ports do not function.
C
A
U
T
IO
N
!