Foxconn Destroyer - Manual (Page 30)

23
3
Enter BIOS Setup
The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press TAB to show POST screen, DEL to enter SETUP" appears at the
bottom of the screen, you can press key to enter Setup.
Main Menu
The main menu allows you to select from a list of setup functions together with two exit choices.
Use the arrow keys to select a specific item and press to go to the sub-menu.
Each item in the main menu is explained below:
► System Information
It displays the basic system configuration, such as BIOS version, system date, time and floppy
drive. They all can be set up through this menu.
► Advanced BIOS Features
The advanced system features can be set up through this menu.
► Advanced Chipset Features
The values for the chipset can be changed through this menu, and the system performance
can be optimized.
► Integrated Peripherals
All onboard peripherals can be set up through this menu. There are IDE devices, Super I/O
devices such as Serial I/O, and other USB ports...etc.
► Power Management Setup
All the items related with Green function features can be set up through this menu.
We do not suggest that you change the default values in the BIOS Setup, and we shall
not be responsible for any damage which resulted from the change you made.
C
A
U
T
IO
N
!
Phoenix - AwardBIOS CMOS Setup Utility
► System Information ► Quantum BIOS
► Advanced BIOS Features Load Optimized Defaults
► Advanced Chipset Features Set Supervisor Password
► Integrated Peripherals
Set User Password
► Power Management Setup Save & Exit Setup
► PC Health Status
Exit Without Saving
Esc : Quit ↑↓←→ : Select Item
F10 : Save & Exit Setup
Time, Date, Hard Disk Type...
► System Information