System information – Foxconn Destroyer User Manual
Page 32
25
3
System Information
This submenu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
► Date -
Day—weekday from Sun. to Sat., automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1st to 31st.
Year—year, set up by users.
Use
a value.
► Time -
This item allows you to configure the desired time. Use
select a field. Directly input a value or use
value.
► IDE Channel Master / Slave
These categories identify the hard disks connected to the PATA port in the system.
In each channel’s display, you can press [Enter] to go to its submenu. You can further
configure specific drive settings. [None] and [Auto] settings allow you to enable or disable this
drive. [None] means no HDD is installed or set, and [Auto] means the system can auto-detect
the hard disk when booting up. In Access Mode setting, selections of [CHS], [LBA], [Large] and
[Auto] can help you to select hard drive for legacy compatibility.
Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large.
Note: Set to [Auto] , the system can detect the hard disk and select the HDD mode
automatically. Suggest you select this option.
CHS
For HDD <528MB
LBA
For HDD >528MB & Supporting LBA (Logical Block Addressing)
Large
For HDD>528MB but not supporting LBA
Phoenix - AwardBIOS CMOS Setup Utility
System Information
Date (mm:dd:yy)
Sat,
Apr 23 2008
Item Help
Time (hh:mm:ss)
17 : 44 : 13
Menu Level ►
► IDE Channel Master
[HDS728080PLAT20]
► IDE Channel Slave
[ None]
Press [Enter] to enter
► SATA Channel 1 Master
[ None]
next page for detail
► SATA Channel 2 Msater
[ None]
hard drive settings.
► SATA Channel 3 Master
[ None]
► SATA Channel 4 Master
[ None]
► ESATA Channel 1 Master
[ None]
► ESATA Channel 2 Master
[ None]
Drive A
[1.44M, 3.5 in.]
Halt On
[
All , But Keyboard]
Model Name:
Destroyer
BIOS Version:
D18
Memory:
1024M
BCM5788
MAC Address
00 1C 25 3B CC AF
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimized Defaults
HDS728080PLAT20