beautypg.com

Onboard devices – Foxconn Destroyer User Manual

Page 39

background image

32

3

► SATA Pri-Master RAID / SATA Pri-Slave RAID / SATA Sec-Master RAID / SATA Sec-Slave

RAID / SATA Thr-Master RAID / SATA Thr-Slave RAID

These items are valid only when "SATA Operation Mode" is set to RAID. They are used to en-

able or disable the RAID function of each SATA port on the motherboard.

The relationships between RAID settings and SATA ports on the motherboard are :

SATA Pri-Master RAID is the lower SATA port of SATA_1 on the motherboard.

SATA Pri-Slave RAID is the lower SATA port of SATA_2.

SATA Sec-Master RAID is the upper SATA port of SATA_1.

SATA Sec-Slave RAID is the upper SATA port of SATA_2.

SATA Thr-Master RAID is the lower SATA port of SATA_3.

SATA Thr-Slave RAID is the upper SATA port of SATA_3.

OnBoard Devices

► OnBoard JMB362 Controller

This item is used to set the operating mode of your eSATA ports. The available options are:

[Disabled] - Select this will turn off the eSATA function.

[IDE Mode] - This

configures the eSATA ports to support legacy PATA mode or SATA mode.

[AHCI Mode] -

The Advanced Host Controller Interface (AHCI) specification describes the reg-

ister level interface for a Host Controller for

Serial ATA. The specification includes a description

of the hardware/software interface between system software and the host controller hardware.

AHCI provides more advanced features including SATA features, but some SATA drives may
not support AHCI, unless they are labeled with AHCI support in its specification.
If your motherboard supporting AHCI, and you have a eSATA device, which also supports

AHCI, then you can select IDE option to have fair performance (only PATA, SATA level), or you

can select AHCI to get its best performance.

[RAID Mode] -

You can configure RAID by using the eSATA ports. When you enable RAID, it

means all your SATA drives must also support AHCI.

► OnBoard Audio Controller

This item is used to enable or disable the onboard audio controller.

Phoenix - AwardBIOS CMOS Setup Utility

OnBoard Devices

OnBoard JMB362 Controller

[IDE Mode]

Item Help

OnBoard Audio Controller

[Auto]

OnBoard BCM5788 Controller

[Enabled]

Menu Level ►

OnBoard BCM5786 Controller

[Enabled]

OnBoard 1394 Controller

[Enabled]

BCM5788 LAN Boot ROM

[Disabled]

BCM5786 LAN Boot ROM

[Disabled]

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F7:Optimized Defaults

IDE Mode