Foxconn Destroyer - Manual (Page 13)

6
1
1-3 Back Panel Connectors
1. PS/2 Keyboard Port
Use the upper port (Purple) to connect a PS/2 keyboard.
2. USB Ports
The USB port supports the USB 2.0/1.1 specification. Use this port to connect a USB device
such as a USB keyboard/mouse, USB printer, USB flash drive and etc.
3. VGA Port
To connect with external display device, such as a monitor or LCD display.
4. DVI-D Port
The DVI-D port supports DVI-D specification. Connect a monitor that supports DVI-D connection
to this port.
5. 1394a Port
This port is used to connect a 1394a device.
6. External SATA Ports
To connect external SATA device(s) to your system by expanding the internal SATA port(s) to
the chassis back panel. External SATA device shall provide power by its own.
7. Audio Connectors
For the definition of each audio port, please refer to the table below :
Port 2-channel
4-channel 5.1-channel
7.1-channel
Blue Line In Line In Line In Line In
Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Microphone In Microphone In Microphone In Microphone In
Orange - - Center/Subwoofer Out Center/Subwoofer Out
Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out
Grey - - - Side Speaker Out
USB Ports
LAN Ports VGA Port
USB Ports
PS/2 Keyboard Port
6 7
3 1
DVI-D Port Audio Ports
Line Out
Microphone
Subwoofer
Rear Speaker
Side Speaker
Line In
8
External SATA
Ports
5
4 2 2
1394a Port