Foxconn Destroyer - Manual (Page 34)

27
3
Advanced BIOS Features
► Removable Device Priority
This option is used to select the priority for removable device.
► Hard Disk Boot Priority
This option is used to select the priority for HDD startup. After pressing [Enter], you can
select the HDD using the Up/Down arrow keys, and change the HDD priority using [PageUp]/
[PageDown]; you can exit this menu by pressing [Esc].
► CD-ROM Boot Priority
This option is used to select the priority for CD-ROM startup. After pressing [Enter], you can
select the CD-ROM using the Up/Down arrow keys, and change the CD-ROM priority using
[PageUp]/[PageDown]; you can exit this menu by pressing [Esc].
► First / Second / Third Boot Device
These three options allow you to select the priority of boot sequence from different devices.
► Boot Other Device
With this function set to enable, the system will boot from some other devices provided that the
first/second/third boot devices failed.
► Boot Up Floppy Seek
This item controls whether the BIOS will check for a floppy drive while booting up. If it cannot
detect one (either due to improper configuration or physical unavailability), it will appear an
error message. Disabling this function, then POST will not detect the floppy.
► Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
► Security Option
When it is set to “Setup”, a password is required to enter the CMOS Setup screen. When it
is set to “System”, a password is required not only to enter CMOS Setup, but also to start up
your PC.
► Full Screen Logo Show
This item allows you to enable or disable full screen customer's logo.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
► Removable Device Priority
[Press Enter] Item Help
► Hard Disk Boot Priority
[Press Enter]
► CD-ROM Boot Priority
[Press Enter]
Menu Level ►
First Boot Device [Hard Disk]
Second Boot Device [CDROM] Select Removable Boot
Third Boot Device [Removable] Device Priority
Boot Other Device [Enabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Security Option [Setup]
Full Screen Logo Show [Enabled]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
Press Enter