Foxconn Destroyer - Manual (Page 61)

54
4
Slope PWM Value:
To define the slope of PWM when the tem-
perature changes. The higher the slope is, the
faster the fan speed changes.
FAN1 and FAN2 only copy their working models
from one of CPU FAN, SYS_FAN1 and SYS_FAN2,
and they do not own their detailed settings.
4. ALARM
Click "ALARM" button to trigger the warning events. It allows you to set the low/high limits of the
monitoring sensors. You can select a particular sensor to be watched carefully, or choose them
all.
If the monitoring value is lower than the low limit or higher than the high limit, and the Action item
in the CONFIG menu is set to "Ask Me", then you can hear a buzzer sounds and the hazard light
is blinking. Click OK/Cancel button in the popped up HMW Alarm screen to acknowledge/cancel
the warning. If OK is pressed, the relative item will be displayed by red on the "HWM INFO"
screen.
Hazard light
ALARM button