Foxconn Destroyer User Manual

Page 27

Text mode
Original mode

Definition

Description

Function

1-2

Set Pin 1 and Pin 2 closed

Force BIOS ROM 1

3-4

Set Pin 3 and Pin 4 closed

Force BIOS ROM 2

5-6 (default)

Set Pin 5 and Pin 6 closed

BIOS select, default is BIOS ROM 1

7-8

Set Pin 7 and Pin 8 closed

BIOS select, default is BIOS ROM 2

BIOS_SELECT

1 2

7 8

The jumper is used to select the booting from BIOS
ROM 1 or BIOS ROM 2. You can refer to the following
table for the setting.

■ Disconnect the power cable before adjusting the jumper settings.
■ Do not clear the CMOS while the system is turned on.

NING!

BIOS ROM 2

BIOS ROM 1

BIOS Select Jumper: BIOS_SELECT

This motherboard provides two BIOS ROMs, and user can easily select one of them for operation. The
selection of BIOS ROM can be done by hardware jumper fix or by software BIOS configuration.