Formax 6204 Series - Manual (Page 85)

Condition in which the system could not reliably read or interpret the
OMR reading marks or barcode from a sheet. Reading error
Marks added to documents containing finishing instructions that can be
identified by a reading head and interpreted according to the used OMR
code definition. Reading marks
The feature that makes it is possible to analyze a problem on an Inserting
System from a remote location. Remote
diagnostics
Technical engineer whose task it is to resolve problems with systems
in the field. Besides dealing with problems, service engineers are also
responsible for preventive maintenance. Service engineer
See V-fold. Single fold
Counter which sets the amount of envelopes to be filled. After filling this
amount of envelopes the system will stop (even during a clear). Stop counter
Person who is responsible for the technical state of the machine.
Normally a supervisor has access to programming functions, which are
restricted for standard users. Supervisor
A test run is intended to validate the settings of the Inserting System:
• Inspect and adjust the stop position of the envelope.
• Check the fold settings for one set.
• Check if the address is correctly positioned behind the envelope
window.
Test run
Checks the thickness of the document set. If the thickness is less or
more than the set value an error message is displayed. Thickness
detection
Contains a stack of paper for a printer or inserter. This paper is supplied
to the machine for further processing. Tray
A V-fold implies the document/set is folded once. The fold-position is
adjustable. This fold is illustrated in the picture below:
Synonym: Single fold.
V-fold
The vertical transport section between feeders and collator. Vertical transport
80
| Page 80 | apr-16-2012 13:09 |
11
English