Formax 6204 Series - Manual (Page 33)

Verifying the Insert Position
To make a good insert of the document set into the envelope, the envelope should be
positioned correctly.
The document set is inserted correctly if the flap folding line of the envelope is positioned
underneath the green roller B.
To verify the insert position:
This adjustment must only be checked in case of problems or when
changing the envelope type.
1. Choose a job and press the [1x] button.
2. Lift the locking lever of the loc and pull the loc into the vertical position.
3. Press No until the question about envelope position appears.
4. Press No again and follow the instructions on screen.
28
| Page 28 | apr-16-2012 13:09 |
4
English