Formax 6204 Series - Manual (Page 65)

Operator Maintenance 8
Maintenance Schedule
Disconnect the mains power supply before performing any
maintenance.
The user must not attempt to service the appliance beyond that
described in this operator manual. All other servicing must be carried
out by qualified service personnel only. Please contact your
authorized distributor.
Maintenance Maintenance
frequency
Daily • Check the system functions.
• Keep the system in proper condition by removing
dust, paper remains, etc.
The machine is delivered with an extra set of brushes.
To always have one clean set available, it is
recommended to soak one set in water and use the other
set.
Weekly
• When dirty or saturated, clean the brushes of the
envelope sealing or replace them (see Clean and
replace brushes on page 61).
• When dirty or saturated, clean the moistening cloth
or replace if necessary.
• Clean feed and insert rollers as instructed by the
Service Engineer.
When the display warns about dusty sensors, certain
sensors have to be cleaned. After cleaning, always
calibrate the photocells (see
Resetting photocells on
page 62).
For the sensors on the envelope or document path, see
Clean the sensors on the envelope or document path on
page 61.
For the exit sensors, see Clean exit sensors on page 62.
When necessary
60
| Page 60 | apr-16-2012 13:09 |
8
English