Trouble shooting table, English – Formax 6204 Series User Manual
Page 73
Trouble Shooting Table
Reference
Remedy
Possible cause
Symptom
-
Connect the system
to the mains.
System not
connected to mains.
The system cannot
be started after
switching on.
-
Replace fuse below
power switch.
Fuse is blown.
-
Close the covers.
A cover is opened.
on page 17
Check envelope feed
adjustments. Place
envelopes correctly in
hopper.
Envelopes stacked
reversed in the
hopper.
System stops with
envelope at insert
position (flap not
open).
on page 38
Store envelopes
according to
specifications.
Envelope flap sticks.
on page 38
Change envelopes
according to
specifications.
Wrong envelope type
used (not according
to specifications or
job settings).
on page 17
Adjust envelope
separation.
Envelope separation
not correctly set.
Envelopes are double
fed.
on page 17
Check and replace if
needed.
Envelopes not placed
properly in the
hopper.
on page 17
Check side guides
and adjust if needed.
Side guides of the
envelope hopper are
set too wide.
Envelope stops
skewed.
on page 17
Refill hopper.
Hopper almost empty.
Envelopes are fed
irregularly.
on page 17
Adjust envelope
separation.
Separation set too
narrow.
on page 17
Check side guides
and adjust if needed.
Side guides set too
narrow.
on page 17
Reposition the
envelope support.
Envelope support not
positioned correctly.
68
| Page 68 | apr-16-2012 13:09 |
9
English