Formax 6204 Series - Manual (Page 53)

Viewing System info and Software versions
From the Supervisor menu, you can view the System info and Software versions.
Proceed as follows:
1. From the Supervisor menu, press the [System info] button.
The System info menu opens.
Here, the following information is shown:
- Flex certificate - this option is used for OMR;
- Counter since last visit - the counter value since the last service visit;
- Last error - The last error generated by the system.
2. Press the [Software versions] button to view information on the version of the installed
software.
The ‘software versions’ menu opens.
This screen shows the software versions that are present in the total system, see
example.
Pressing the [i] button shows the subversion revision numbers instead of the standard
software version numbers. Generally these are used for development reasons, but
sometimes it’s convenient to have them for trouble shooting reasons.
48
| Page 48 | apr-16-2012 13:09 |
6
English