Formax 6204 Series - Manual (Page 32)

4. Press No if asked if the address is readable.
5. Follow the steps in the wizard.
Adjusting the Envelope Insert Fingers
To make a good insert of the document set into the envelope, the insert fingers A should
be about 5 mm (0.2 inch) inside the envelope.
The outer fingers should be about 5 to 10 mm (0.2 to 0.4 inch) from the edges of the
envelope.
To verify that the position of the fingers is correct:
1. Choose a job and press the [1x] button.
2. Follow the steps in the wizard.
3. Loosen the knurled knobs C.
4. Adjust the fingers A so that the tip is approximately 5 mm (0.2”) inside the envelope.
5. Tighten the knurled knobs C.
6. Adjust the outer fingers D approximately 5 - 10 mm (0.2 till 0.4”) from the edges of the
envelopes.
Check the position of the insert fingers when changing to a different
type of envelope.
4
English
27
| Page 27 | apr-16-2012 13:09 |