Formax 6204 Series - Manual (Page 45)

•
Press the button to enter the document height. The height or the ISO format of
the document will be displayed next to the relevant feeder.
• Press the button to select a feeder. The selected feeder is highlighted.
•
Press the button to show a numeric keypad to enter the exact dimension of the
document.
Dimensions can be entered in mm, inches or as standard ISO paper dimensions
(depending on installation settings). The system will not allow entering dimensions
out of technical ranges. The document size can be set between 90 mm (3.54 inch)
and 356 mm (14 inch).
The default document size setting of a new job is 297 mm (11.7 inch).
•
Press the button to link two feeders. This function enables to fill two adjacent
feeders with the same documents. When the first feeder is empty, the system
automatically swaps to the other feeder.
• Press the button to select two adjacent feeders. The selected feeders will be
highlighted.
• Press the button to link two highlighted feeders. The link-symbol will be displayed
between the selected feeders.
When linking two feeders, the program will automatically apply the
number and format of the documents of the lowest feeder to the
other feeder.
40
| Page 40 | apr-16-2012 13:09 |
5
English