English – Formax 6204 Series User Manual

Page 62

OMR advanced license

For the OMR advanced license the following functions are available:

• The basic functions (Start, Insert, Parity, Safety)
• Divert - The machine stops, manually remove the set from the collator. Reset and

start again.

• Stop - The machine stops, manually remove the set from the collator. Reset and start

again.

• Selective Feed - The machine will selectively feed an enclosure when commanded

so.

• Sequence Check - Sheets in a stack can accidentally get out of sequence or can be

missing. This can be detected by the sequence check. Each sheet has a binary code
that is a part of the reading code. Depending on the application one, two or three
marks are used by sequence check.

OMR general remarks

General remarks:

• In case of OMR the marks must always be used in the sequence as shown in the

figure.

• If a function is suppressed the following function will move upwards one line.
• The mark definition is a service setting.

English

| Page 57 | apr-16-2012 13:09 |