ETA Cabero 4 v 1 - Manual (Page 33)

GB
33 / 69
–
The power cord must not be damaged with sharp or hot objects, open fire, it must not
be sunk into water or bent over sharp edges. Never put it on hot surfaces or do not let
it hang over the edge of a table or work tables. Hitting, stumbling or pulling the power
cord e.g. by children can result in tilting over or drawing the appliance down and
serious injury!
– Do not wind the power cord around the appliance; this will extend its life.
– Never use the appliance for any other purpose than for that described in these
instructions for use!
– The producer does not undertake any responsibility for damage caused by improper
use of the appliance and the accessories (e.g. food deterioration, injury by knife
edge, fire, etc.) and its guarantee does not cover the appliance in the case of failure
to comply with the safety warning above.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – drive unit
A1 – speed switch (ON) A4 – power supply control light
A2 – speed regulator A5 – adapters blocking buttons
A3 – display A6 – power cord
B – blending adapter
C – beater
C1 – gear
D – double-beater
D1 – gear
E – mixing/beating container 800 ml
E1 – anti-slip base/lid
F – small chopping container 500 ml
F1 – central shaft F3 – container lid
F2 – sickle-shaped knife F4 – hole for drive connection
F5 – anti-slip base
G – large chopping container 1250 ml
G1 – central shaft G3 – container lid
G2 – sickle-shaped knife G4 – hole for drive connection
G5 – anti-slip base
H – multi-purpose container 1250 ml
H1 – central shaft H7 – anti-slip base
H2 – lid lock button H8 – sickle-shaped knife
H3 – container lid H9 – graters holder
H4 – hole for drive connection H10 – cutting grater
H5 – filling hole H11 – slicing grater
H6 – pusher H12 – tearing grater
CH – special attachment for mashing potatoes and vegetable puree (plastic finish)
CH1 – knife CH3 – gear (plastic finish)
CH2 – matrix
I – chopping container Express
I1 – central shaft I4 – hole for drive connection
I2 – sickle-shaped knife I5 – anti-slip base
I3 – container lid I6 – seal