ETA Cabero 4 v 1 User Manual
Page 32

32
GB
/ 69
– Never use the appliance if its power cord or plug is damaged, if it does not work
properly, if it fell down and was damaged or if it fell to water. In this case take the
appliance to a special service to check its safety and proper function.
– After finishing work and before cleaning, always switch off the appliance and disconnect
it from power supply by taking the power cord connector out of the electric socket.
– This appliance is not intended for outdoor use.
– Do not place any objects on the appliance.
– Before preparation, remove possible packages from food (e.g.
paper, a PE bag, etc.).
– It is not allowed to modify the surface of the appliance in any way (e.g.
using
a selfadhesive wallpaper, foils, etc.).
– Do not insert or take out the plug to or from a socket with wet hands and do not
pull the power cord!
– Do not use the appliance without the anti –slip base!
– Never immerse the drive unit into water or wash it in running water!
– The product is intended for home use and similar (in shops, offices and similar
workplaces, in hotels, motels and other residential environments, in facilities providing
accommodation with breakfast). It is not intended for commercial use!
– Use the appliance in the working position only at places with no risk of turning over
and in sufficient distance from heat sources (e. g.
heater, stove, grill, etc.), and wet
surfaces (e. g.
sinks, wash basins, etc.)
– Do not use the appliance in connection with a programmer, a timer or any other
appliance that switches the appliance on automatically.
– Use the appliance designed for this type only. Using another appliance can represent
a risk for the operator.
– Do not use the hand blender in containers, in which you heat food at the same time
using heat sources (e.g. heater, electric/gas/induction cooker, hot plate etc.).
– Long hair, loose clothes or accessories and jewellery can get caught by the rotating
parts of the extra attachment.
Make sure that your hair, clothes and accessories do
not get into dangerous vicinity to the rotating parts!
– Proper mounting of the bowl lid will release safety locks and you can connect the appliance.
– Do not insert the appliance into any body holes.
– Do not switch on the appliance without ingredients in it!
– Do not remove the appliance if the drive unit is in operation!
– Make sure that the power supply cable does not get between the rotating parts of the
accessories.
– Before you remove the appliance or the drive unit from the container, let the rotating
parts stop completely.
– Before emptying the chopping container, first remove the sickle –shaped knife.
– Always unplug the appliance from power supply if you leave it unattended.
– Do not process food at temperature exceeding
about 80 °C.
– Never insert e.g.
fingers, fork, knife, spatula, spoon into rotating parts of the
appliance and the accessories.
– If the processed food starts to stick to the appliance (e.g.
on knives, the beater, the
container or the lid), switch off the appliance and clean the accessories carefully (e.g.
using a
spatula).
– Check the condition of the power cord of the appliance regularly.
– If you need to use the extension cord, it has to be uncorrupted and it has to comply with
the valid standards.