DNF Controls DMAT-DL - Manual (Page 9)

9 DMAT, for DoReMi Labs Protocol
13 Video Type
Press ++/-- to toggle between NTSC/PAL
14 Nb pixels
Press ++/-- to toggle between Full/Limited
15 Decimation
Press ++/-- to toggle between On/Off
16 Nb Fields
Press ++/-- to toggle between One/Two
17 SCSI ID
Press ++/-- to select 00-07
18 Clks/frame
19 Emulate
Press ++/-- to toggle between V1/BVW-75
20 # Audio Ch
Press ++/-- to toggle between 0/2
21 Jog On
22 Loop mode
Press ++/-- to toggle between On/Off
23 Edit Time
Press [MENU] to select
Edit IN (press ++/-- to select 04-10)
Edit OUT (press ++/-- to select 04-10)
24 Stripe TC
Press Softkey [CHG] to save. The display will prompt “Are you
sure?” Press Softkey [YES] to stripe [NO]– not to stripe
25 Odd Fields
Press ++/-- to select Under 00%- under 100%
26 Stop Chase
Press ++/-- to select Nb frames 00-10
27 Fast mode
Press ++/-- to toggle between Normal/Enhanced
28 Jog speed
Press ++/-- to toggle between No Limit/Limit to 100%
29 Stop Mode
Press ++/-- to toggle between Still Mode/ EE Mode
30 Version Number
Press [MENU] to see information about version number, serial
number, RAM size etc.
6. Press [ESC] to exit the Menu Mode.