DNF Controls DMAT-DL - Manual (Page 11)

11 DMAT, for DoReMi Labs Protocol
Press [ESC] to exit the menu mode.
6. On the ST300:
Press [MENU].
Press Softkey [YES] to enter ST300 SETUP MENU.
The display shows RECORD MODE. Press [MENU] to select Crash, Assemble or
Insert record.
Press [ESC] to exit the menu mode.
Setup is complete.
RECORDING.
Press VTR[1].
Press [RECORD] key. Record is started.
Press [STOP] to stop recording at any time.
SIMULTANEOUS PLAYBACK DURING RECORD:
Put VTR1 into RECORD mode.
Press VTR[2].
Press [EE]. The light above EE key turns ON.
The ST300 is in PB/EE mode.
In this mode, the unit switches to incoming video any time it’s in STOP mode.
In this mode, the display shows running timecode of the recorder.
Press [MARK] to mark recorder time into Cue Points.
Press [GOTO] to search to marked Cue Points.
Press [PLAY] to play video on VTR2.
Press [STOP] twice to return to EE mode and monitor current record time and video.
B. CUE POINTS
S ELECT A C UE P OINT
1. Press [NEXT CUE] or [LAST CUE] to step through the Cue Points.
OR
Manually enter the desired Cue Point number using the numeric keypad.
2. The current Cue Point number and its contents will be shown on the second line
of the display.
M ARK /E NTER /E DIT A C UE P OINT
1. Press [MARK] to mark the VTR’s time into the Cue Point.
OR
2. Press [ENTER TIME] to manually enter a time using the numeric keypad.
The ENTER TIME key indicator will turn on.
3. Manually enter a time on the numeric keypad.
Press [ENTER] to save the entered time.
OR
4. Press [ESC] to exit without saving.
The ENTER TIME key indicator will turn off.