DNF Controls DMAT-DL - Manual (Page 6)

6 DMAT, for DoReMi Labs Protocol
OR turn the wheel to select another item.
For Wheel only:
Press Softkey [PRSET] to select the SLOMO Preset Speed Mode.
Press Softkey [UPDATE].
When exiting SLOMO mode, the last used speed is saved in the Preset
Speed register.
Press Softkey [STATIC].
The Preset Speed register is NOT updated when exiting SLOMO mode.
It is only changed by [SHIFT] + [SLOMO] (PRESET SLOMO).
GANG
Press Softkey to select PERMANENT GANG (described in the
MODE FUNCTION Table) or TEMPORARY GANG. In TEMPORARY mode,
press and hold the VTR key that you want to read status from, then press
the VTR#’s of those VTRs that you want to include in the gang. Release
the keys. The LED on the monitored VTR blinks, all other VTRs in the
gang stay on constantly. To break the temporary gang, press any VTR#
key.
SEARCH Press Softkey to select ST300 or VTR to control the search speed of the
SPEED VTR.
Either the ST300 or VTR mode will be faster.
HINT: Select VTR mode if you will be controlling multiple VTRs.
Select ST300 if you will be controlling older VTRs
ST300
SETUP
Press Softkey beneath ClearCues to clear all Cue Points to 00:00:00:00.
Press Softkey [YES] when asked “Are You Sure?”
Press Softkey beneath SetDefault to set ST300 to default settings.
Press Softkey [YES] when asked “Are You Sure?”
DISPLAY
The version number for the currently installed software is displayed.
SOFTWARE
VERSION
DROP
Press Softkey to select DROP FRAME ON or OFF.
FRAME Used in conjunction with Timecode Generator preset.
RECORD Press Softkey to select single button or 2-button record.
RECORD = [REC] Only.
OR
RECORD = [REC] + [PLAY].
FREEZE
Press Softkey to enable or disable FREEZE at Record Outpoint. Changing
mode automatically clears FREEZE point.
ST300 SETUP
Clear Cues SetDefault