DNF Controls DMAT-DL - Manual (Page 12)

12 DMAT, for DoReMi Labs Protocol
G
OTO
/P
REROLL TO A
C
UE
P
OINT
1. Select the desired Cue Point.
The Cue number and its contents are shown on the bottom line of the display.
2. Press [GOTO] to search to the Cue Point. The GOTO key indicator will turn on.
When the VTR reaches the Cue Point time, the GOTO key indicator will turn off.
3. Press [PREROLL] to preroll to the Cue Point.
The PREROLL key indicator will turn on.
When the VTR reaches the Cue Point time, the PREROLL key indicator will turn off.
C. G OTO /P REROLL TO A M ANUALLY E NTERRED T IME
1. Press
[ENTER TIME] to manually enter a time using the numeric keypad. The
ENTER TIME key indicator will turn on.
2. Manually enter a time on the numeric keypad.
3. Press [GOTO] OR [PREROLL] to search to the entered time
OR
4. Press [ESC] to exit without searching.
The ENTER TIME key indicator will turn off.
D. R ECORD M ODE S ELECTION
1. Press
[MENU]. The MENU key indicator will turn on.
2. Turn the wheel until “REC:” is viewed on the top line of the display.
The current Record mode is shown.
3. Press the [MENU] key to select:
Record Lockout, Assemble, Crash or Insert Record mode.
4. INSERT ONLY - Press the desired Softkey to toggle
Video, Audio1, Audio2, Audio3 or Audio4 record on/off.
The Softkeys are located just below the display.
Follow the line graphic from the bottom of the display to the Softkey.
5. Press [ESC] to exit the MENU. The MENU key indicator will turn off
OR
Turn the Wheel to for other setup options.