DNF Controls DMAT-DL - Manual (Page 8)

8 DMAT, for DoReMi Labs Protocol
A1: (press ++/-- to toggle On/Off)
Insert: (press ++/-- to toggle On/Off)
Assemble: (press ++/-- to toggle On/Off)
Video: (press ++/-- to toggle On/Off)
TC: (press ++/-- to toggle On/Off)
A2: (press ++/-- to toggle On/Off)
03 Set Video
Press [MENU] to toggle between options:
Delay: (press ++/-- to set 00-310 sec)
ChromHue: (press ++/-- to set –128-+127)
ChromSat: (press ++/-- to set –128-+127)
LumaCont: (press ++/-- to set –128-+127)
LumaBrit: (press ++/-- to set –128-+127)
PAL switch 0
Black (press ++/-- to toggle between 0.0/7.5 IRE)
HTRIG (press ++/-- to select desired value)
HTRIG (press ++/-- to toggle On/Off)
CH PH (press ++/-- to select desired value)
Pattern (press ++/-- to toggle On/Off)
04 Save
Press Softkey [CHG] to save. The display will prompt
“Are you sure?” Press Softkey [YES] to save, [NO] – not to save
05 Disc Access
Press ++/-- to toggle between Play & Record/Play Only
06 Frame Mode
Press ++/-- to toggle between On/Off/Play Only
07 Step Rec
Press ++/-- to toggle between Disabled/Enabled
08 Clip menu
Press ++/-- to scroll the list of available clips
09 TC burn-in
Press [MENU] to toggle between
Color (press ++/-- to selelct Off
White/Black
White/Bkgd
Black/White
Black/Bkgd
Position (press ++/-- to select Bottom_Right
Bottom_Center
Bottom_left
Top_Left
Top_Center
Top_Right
10 Audio In
Press ++/-- to toggle between Analog/Digital
11 SCSI Speed
Press [MENU] to toggle between
Clock (press ++/-- to select 10/20 MHz)
Width (press ++/-- to select 8/16 bit)
12 V1 Type
Press ++/-- to toggle between Player Only / Rec/Player