Function table – DNF Controls 2MCE-24P User Manual
Page 16
16 2MCE-24P, Two Machine, Cuts Only Editor
6. FUNCTION
TABLE
Function
Key Press
Description
AUTOEDIT
[AUTOEDIT]
Set IN time and (Optional) OUT Time. Press [AUTOEDIT] and
Recording VTR/DDR performs an Autoedit using Assemble or Insert
recording.
AUTOEDIT
PREVIEW
[SHIFT] + [AUTOEDIT]
Set IN time and (Optional) OUT Time.
Press [AUTOEDIT] + [SHIFT] and Recording VTR/DDR performs
a preview of the Autoedit.
FFWD
[FFWD]
Press and HOLD to shuttle. Release key to stop.
Set WIND Speed in MENU.
GOTO
In or OUT
[GOTO]
Search the VTR to the contents of the currently displayed IN or OUT
point or entered time.
JOG
[JOG]
Select JOG mode and enable the Wheel.
OFFSPEED
PLAYBACK
[SHIFT] + [OFFSPEED]
Play offspeed. Turn wheel to change speeds.
PREROLL
[PREROLL]
Preroll the VTR to the contents of the currently displayed Cue Point.
PREROLL
VALUE
[SHIFT] + [PREROLL]
Enter desired Preroll Value. Press [ENTER] to save entry
OR press [ESC] to exit without saving entry.
RECORD
[SHIFT] + [REC]
Places VTR in the Record mode selected by RECORD MODE in the
SETUP MENU. One button record.
RESET TAPE
TIME
[DEL] + [TIME MODE]
Reset the Tape Time to 00:00:00:00 on the currently selected VTR.
REWIND
[RWD]
Press and HOLD to shuttle. Release key to stop.
Set WIND Speed in MENU.
SHUTTLE
[SHUTTLE]
Select SHUTTLE mode and enable the Wheel.
STOP
[STOP]
Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
TIME MODE
SELECT
[TIME MODE]
Press to toggle between Timecode (TC), VITC (VT) or Tape Timer
(TM) display modes.
TIME PRESET
(Generator Preset)
[SHIFT] +
[TIME MODE]
Press to enter Time Preset. Press [ENTER] to load Time Generator
OR press [ESC] to exit without saving.