DNF Controls 2MCE-24P - Manual (Page 10)

10 2MCE-24P, Two Machine, Cuts Only Editor
f. PERFORM AN OFF SPEED EDIT
1) Select the PLAYER VTR.
2) Press
[OFF SPEED]. The OFF SPEED indicator will turn on.
(Press [OFF SPEED] again to disable off speed edit.)
3)
Turn the wheel to select the PLAYER’s playback speed.
Select +0.00 for STILL frame.
(To slo-mo the VTR and select a slo-mo speed, press [SHIFT] + [OFF
SPEED]. Turn the wheel. Press [STOP] when done.)
4)
Set the IN point by manually entering a time using the numeric keyboard .
OR
B
y pressing [IN] and marking the current tape time.
5) The PLAYER OUT Point is ignored.
6) Select the RECORDER .
7)
Set the IN point by manually entering a time using the numeric keyboard .
OR
B
y pressing [IN] and marking the current tape time.
8) Set the optional OUT Point by manually entering a time, using the numeric
keyboard .
OR
B
y pressing [ OUT ] and marking the current tape time .
OR
B
y pressing [ SHIFT ] + [ OUT ] .
The display will show the current RECORDER duration.
Manually enter the desired duration using the numeric keypad.
Press
[ OUT ] to save the entered duration .
OR
P
ress [ ESC ] to exit without saving the entered duration.
9)
Press [ REC ] to perform the edit.
The PLAYER will cue to the IN time.
The RECORDER will preroll.
The PLAYER will Slo
- Mo at the selected speed.
T he RECORDER will go into play.
At the IN point, the RECORDER will go into record.
At the OUT time, the RECORDER will terminate record.
During the Edit, turn the wheel to change the Slo-Mo speed.
10)
During the edit in INSERT mode,
Press the Softkeys to punch desired channels into and out of record.