G. preview an edit, H. review an edit – DNF Controls 2MCE-24P User Manual
Page 11
11 2MCE-24P, Two Machine, Cuts Only Editor
11)
Press
[
STOP
]
at anytime to abort the edit.
12)
For OPEN-ENDED edits, press
[
OUT
]
to terminate the edit.
13)
Upon successfully completing the edit
:
T
he RECORDER IN Point will be set to the record out time.
The RECORDER VTR will cue to its
IN
T
ime.
14) Press
[OFF SPEED] to disable off speed edit. The SLOMO key indicator will
turn off.
g.
PREVIEW AN EDIT
NOTE: PREVIEW and REVIEW functions apply to INSERT and ASSEMBLE edit
modes only.
1)
Press
[
PR
E
V
IE
W
]
to preview the edit.
The PR
E
V
IE
W key indicator will turn on.
2)
At the IN point, the record ready channels will go
into EE mode.
At the OUT point, the record ready channels will go to playback mode.
3)
Press
[
STOP
]
at anytime to abort Preview.
4)
Upon completion, the PR
E
V
IE
W key indicator will turn off.
h.
REVIEW AN EDIT
Review mode is only available after a successful edit has been completed.
1)
Press
[
REV
IE
W
]
to review the previous edit.
The REVIEW key indicator will turn on.
2)
The RECORDER will preroll to the original IN point, then play the edit.
At the OUT point, the RECORDER will post roll 2 seconds, then stop.
3)
Press
[
STOP
]
at any time to abort Review.
The REVIEW key indicator will turn off.