DNF Controls 2MCE-24P - Manual (Page 13)

13 2MCE-24P, Two Machine, Cuts Only Editor
j. ONE MACHINE AUDOEDIT PREVIEW FUNCTION
1)
Select Recorder VTR.
Record mode must be Assemble or Insert.
2)
Set the IN point by manually entering a time using the numeric keyboard.
OR
By pressing [IN] and marking the current tape time.
3) Set OPTIONAL OUT point using the same procedure as IN.
OR
Set the OPTIONAL OUT point by pressing [SHIFT] + [OUT].
The display will show the current PLAYER duration.
Manually enter the desired duration using the numeric keypad.
Press [OUT] to save the entered duration.
OR
Press [ESC] to exit without saving the entered duration.
4) Press
[SHIFT] + [AUTOEDIT].
The machine will preroll to the IN Point.
The second line of the display will show “Prerolling---.”
The machine will go into PLAY mode.
At the IN point, the record ready channels will go into EE mode.
The second line of the display shows “Autoedit---.”
At the OUT Point, the record ready channels will go into playback mode.
5) Press
[STOP] at anytime to abort the Preview.