DNF Controls 2MCE-24P - Manual (Page 12)

12 2MCE-24P, Two Machine, Cuts Only Editor
i. ONE MACHINE AUTOEDIT
1)
Select the RECORDER VTR.
Record mode must be Assemble or Insert.
2)
Set the IN point by manually entering a time using the numeric keyboard.
OR
By pressing [IN] and marking the current tape time.
3) Set OPTIONAL OUT point using the same procedure as IN.
OR
Set the OPTIONAL OUT point by pressing [SHIFT] + [OUT].
The display will show the current PLAYER duration.
Manually enter the desired duration using the numeric keypad.
Press [OUT] to save the entered duration.
OR
Press [ESC] to exit without saving the entered duration.
4) Press
[AUTOEDIT].
The recorder will preroll to the IN point.
The second line of the display will say “Prerolling---.”
The recorder will be put into PLAY mode.
At the IN Point, the recorder will go into Record.
The second line of the display shows “AUTO EDIT.”
At the OUT point, the recorder goes out of Record and does a 2-second postroll,
then goes into STOP mode.
5) Press
[STOP] at anytime to abort the autoedit.