D-Link DCS-5300 - Manual (Page 81)

81
Explanations of the Settings screen are on the following pages.
Playback Program (continued)
Using IP surveillance Software (continued)
Frame Selection Indicator
The frame selection indicator only appears when you change the display mode
to Preview Mode. It appears as a red rectangle surrounding one of the nine
Event Preview Frames. Once you select one of these frames, you can control
its play status through the jog dial in the control area.
Pull Bar
The Pull Bar is a fast, flexible control for seeking data in the selected time
period. It represents the total length of time in that period. You can click or pull
the indicator on the pull bar to the point you want to see. And the current displaying
video will halt and start to play the video sequence from the point you choose. If
the video sequence has been paused, the display area will show the point you
select without playing. The Pull Bar will only function under the normal display
mode.
Settings
After the main window is shown on the screen, you must modify the settings to
make it work properly. Click on the “Settings” button in the system control
tool, and the dialog box appears on the screen as shown below: