D-Link DCS-5300 - Manual (Page 45)

45
Configuration > Advanced > Motion Detection
Click the Motion Detection button from the Configuration screen to access
settings that effect how the DCS-5300 Internet Camera can serve as a
security device by recording only when motion is detected.
Using the DCS-5300 with an Internet browser
(continued)
You may press to fine-tune the image and see what effect the setting will
have on the image. When the image is acceptable, press to store the
image settings, or to recall the original settings. If settings are changed
without saving, they will be used until the next system start-up.
Configuration > Advanced > Image Setting (continued)
Click the video button from the Configuration screen to access video settings
that affect how the video image appears.
Image Brightness, Contrast, Saturation and Hue are all adjusted in the same
manner. For each video compensation you can set from among eleven levels
ranged from -5 to +5.
From this screen you can fine tune the video image.
Click Motion Detection