D-Link DCS-5300 - Manual (Page 55)

55
Configuration > Tools > Default
Click on the Default button to access the factory Default settings from the
Tools menu.
Click Apply on the screen to restore the factory default settings. This means
any changes made will be lost and the system will be reset to the initial status
when shipped from the factory. After confirmation, the system will restart and
require the IP Installer software program to setup the DCS-5300.
Using the DCS-5300 with an Internet browser
(continued)
Click Apply to make
changes effective
Configuration > Status > Device Info
Click on the Status tab to access Device Info and a Log of DCS-5300 system
activity. The Device Info is the default screen when you click on the Status
tab.
Click Default