D-Link DCS-5300 - Manual (Page 54)

54
Snapshot every second(s) -
Send snapshots by email - Any upload action specified in the options above
will use the method chosen here. The captured
snapshot named “video.jpg” will be attached in
the email with subject “Periodic snapshots.”
Send snapshots by FTP - The captured snapshots will upload to the external
FTP server with the file name depending on the
next option. It can be used to refresh the captured
image stored in the external web server to build
creative homepages.
If the suffix is added, the captured date and time
can be easily differentiated from the snapshot file
name in either sequential or event operation. For
instance, “[email protected]” means
the JPEG image was captured at 4 minutes and 5
seconds after 3 o’clock, January 2nd, A.D. 2002.
If the suffix is omitted, the file named “video.jpg”
on the external FTP server will be refreshed at
the specified interval.
Configuration > Tools > Applications (Continued)
Trigger action - There are four options for two actions regarding
either trigger condition. They can have multiple
selections. While choosing the trigger output
alarm, the digital output will short both pins to
connect the circuit of the attached external
device; otherwise both pins will be open. While
choosing to upload snapshots, the method can
be either email or FTP. The snapshot names will
be “videopre.jpg”, videotrg.jpg”, and
“videopos.jpg” respectively for the snapshots
before event, right upon event, and after event.
The date and time suffix may be added according
to the option. Confirm the external mail or FTP
server settings in network configuration.
Sequential operation
Using the DCS-5300 with an Internet browser
(continued)
FTP put snapshots with
date and time suffix -
The DCS-5300 will send snapshots at the
specified interval to the external server according
to the chosen method. Remember this operation
is dependent to the weekly schedule.