D-Link DCS-5300 - Manual (Page 4)

4
Introduction
Motorized Pan and Tilt Operation
The DCS-5300 has a pan and tilt function that can expand your viewing area to
cover a wide 270
o angle side-to-side and a 90 o angle up and down. This can be
controlled with a PC from any location or locally using the included infrared
remote control.
The D-Link SecuriCam DCS-5300 Internet Camera is a full featured surveillance
system that connects to an Ethernet, Fast Ethernet or broadband Internet
connection to provide remote high-quality video and audio. The DCS-5300 is
the latest product added to the D-Link internet camera line. The camera features
a motorized pan and tilt function found on more expensive cameras. This
function allows the viewing area of the camera to extend 270
o side-to-side and
90 o up and down. The DCS-5300 gives you the ability to monitor your home/
office when you can not be there. Place the camera anywhere you would like to
monitor with no PC required on location!
Features and Benefits
The D-Link SecuriCam DCS-5300 Internet Camera is connected through an
Ethernet connection and a power source. You only need one PC to initially
configure multiple cameras for all locations. Each camera has a built in web
server with a configurable IP address.
Suports a Variety of Platforms
In addition , the DCS-5300 supports a variety of platforms including FTP, SMTP,
NTP, and HTTP. The camera also supports UPnP and DDNS. DDNS allows
the camera to use an easier to remember naming format rather than an IP
address. UPnP will allow users of Windows XP and ME to install the camera
with the click of a mouse.
CCD Sensor
The DCS-5300 comes standard with a high quality CCD sensor that is superior
to a CMOS type sensor. The fixed focus glass lens will facilitate the use of the
DCS-5300 providing crystal clear and sharp images. You can view up to 30
frames per second of live motion video with 380 lines resolution.