Devolo MicroLink dLAN Audio - Manual (Page 52)

Application examples
|
| devolo MicroLink dLAN Audio |
52
EN
speakers connected directly to the power supply grid. With this type of con-
nection, you can use multiple speakers, allowing you to broadcast spoken
announcements in several rooms simultaneously.
ቢ Connect the microphone to the power supply grid using the "Mic" jack of
the MicroLink dLAN Audio. Connect the speakers via the Line-Out jack of
a second MicroLink dLAN Audio.
ባ On the MicroLink dLAN Audio adapter of the microphone, use the
switches to set the sending channel, and select recording mode.
ቤ On the MicroLink dLAN Audio adapter of the speakers, use the switches
to set the channel to be received, and select playback mode.
As soon as you speak into the microphone while it is switched on, the audio
data are transferred to the speakers via the power supply grid for playback.
Please note that, because of the buffering required for the streaming process,
the speech reaches the speaker sets on a time-delayed basis.
MicroLink dLAN Audio
Microphone
MicroLink dLAN Audio
MicroLink dLAN Audio
MicroLink dLAN Audio
Active speakers
Active speakers
Active speakers
For this application you need:
Server Microphone
Client Active speakers
dLAN devices MicroLink dLAN Audio (1x for the microphone and 1x for each
active speaker set)